• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the replacement handles made of upvc are easy to install and feel good. It is important to be aware that the handle you select for your window should be appropriate for your.

The step height is the most crucial factor. It is the distance between the handle and the base or frame. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a variety of replacement upvc window handles available for purchase. They come in a variety of colours and styles so there's bound to be something that fits your windows. It's easy for you to buy something on impulse particularly when the handle is damaged. Therefore, it is best to do some research before purchasing an alternative. First, you need to know what type of upvc handles you have and what the differences between them. The table below shows the most popular handles to help you find the one that will fit your windows made of upvc.

Espag handles are the most commonly used and are used on the majority of modern double-glazed windows. They are usually attached to the frame by two screws that screw into the frame from both sides, above and below.

The spindle bar in the back could be of different sizes, and can determine if they are left-handed or right-handed. It is essential to know the measurements of the handle you have to ensure that you order the appropriate replacement.

The arm is fixed to the frame with two bolts, much like the Espag handle. However, the arm has a low projection to ensure that it doesn't scratch your blinds. This is an ideal choice for blinds for your windows made of Upvc and want to ensure that the handle blends with the blinds.

Cockspur handles are similar to Espag handles, but they have a nose that is closed over a wedge, which is placed on the window frame. This kind of handle is commonly used on older Upvc windows as well as some wooden windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing on the top of window. The window is opened from the inside, allowing you to clean from outside without needing to step out on a ladder or walk over the garden fence. They are also an excellent option for those who have limited mobility and increase security and accessibility in the home.

Hints and tips

Many people will have to replace their uPVC window handles at some point. It is essential to know some tips and tricks that can help you make the task easier.

The first step is check what type of handle you have at home. Depending on the kind of handle and the locking mechanism, it could be necessary to replace the lock and handle. If the roller cams or shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them along with the handle.

Thankfully, the majority uPVC handles conform to industry standards and are very alike. This allows for a relatively simple task. The first step is to remove the screws from the handles, usually using pozi-drive screws. After the screws have been removed you will be able to take apart the handle.

When you have the handle broken from the handle, it's a good idea to make a note of how much of the spindle protrudes from the base of the handle. This will help you measure the length of the spindle to determine the replacement handle. To do this, determine the length of the square peg that sticks out from the top of the handle, and use it as a reference.

This is especially important for inline uPVC handles for windows, since they are always straight and only open to the left or right. They won't work in the middle. It's a good idea if you're not sure of the type of handle you have in your home, to borrow a handle to see how it functions.

Another great tip for working out what handed the uPVC window handle is to look at the way the handle rotates when operating. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're unsure then you can always have someone else open the window using the handle and figure out how it operates in this way.

Find the spindle's measurement.

It can be difficult to pick the right replacement handle for your window because there aren't all handles that come in the same size. The spindle is the part that controls the locking mechanism inside the window. It is crucial to ensure that when installing the new handle, you measure the spindle length accurately to ensure that it will fit. There are a variety of types of uPVC window handles, and they operate in different ways, so it is essential that you know which kind of handle you have and the type of locking system.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox that is within the window frame. When you turn the handle, this turns the lock inside the gearbox and opens the window. They are typically utilized on uPVC casement windows. They can be locked with keys to provide extra security.

Cockspur handles are equipped with a "nose" which closes over a wedge-shaped striker block on the frame. They are typically found on older double-glazed uPVC windows. They are also fairly simple to use and can be locked with keys. These handles can be slightly more difficult to find replacements for because they aren't as popular as the espagnolette handle.

If you own a tilt-and-turn uPVC, you will need a replacement handle with a different locking mechanism. It can open the window, but also rotate it around to open it fully. It is essential to select the handle with an opening of at least 55mm to be able reach the Window panel replacement frame.

You can use the same method to take off and replace this kind of uPVC handle, however you must be careful when unscrewing the old one. You may have to open the window a little larger than usual to ensure that you can access both screws that attach it to the frame. Once you have put in your new uPVC handle and checked that it is in the right position, then you can tighten the screws, and test the lock to confirm that it is working properly.

Install the new handle

If you have the proper replacement handle, it will simply be screwed into place. This requires a screwdriver but could be simpler with an electric one. When screwing in place it is crucial not to over tighten the screws as this can cause the handle to crack or warp.

The second step in installing the handle is to install the spindle. The spindle is a part that runs through the handle to control the locking mechanism inside the window. It is important that the part fits correctly, as this will allow the window to be opened and closed securely.

There are several different types of uPVC window handles. There are several types of window double glazing replacement handles made of uPVC.

Espagnolette Handles - These are handles that are inline and can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles: These are like inline handles but have a curved design which is ideal for hard-to reach windows.

Tilt and turn handles - These are used to control the opening mechanisms and closing mechanisms for tilt and move windows.

They are the most popular and the majority of uPVC windows have them in their place. In the UK they are usually known as "Bay Windows".

It can be very frustrating when your uPVC handle fails. But, there isn't a need to replace the entire uPVC windows because of a broken handle. There are a number of simple steps that can be taken to repair or replace a broken uPVC window handle.

You can repair your broken window handle quickly by identifying the type and determining the spindle. It is crucial to be patient and ensure safety when working with windows and tools but this is a easy task. It can mean the difference between a safe and secure home, or a window that can be easily opened. Bridgewater Glass is the place to visit if you have any questions or want to speak with an expert about replacing your window handle. We have a group of experienced and knowledgeable professionals who are able to assist you with any problems you may be facing.