• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet leave and come whenever they want without you having to let him in or out. They can also help stop your cat from urinating inside the house.

It is easier to install the cat flap on a upvc panel than on a glass one however, you'll require some expertise and right tools.

Take a measurement of the door

Installing a cat flap on the door isn't easy but if you select the right kind of cat flap make sure you take your time and follow the steps provided it should not prove to be too difficult. We will show you how to draw the shape, using the jigsaw to slice the area in the door and then finish the job by securing the cat flap cost flap to the door. This will ensure that the flap stays in place and protects the door from wind and rain damaging the door.

The first step is take a measurement of the width of your pet to get an accurate measurement of what size of cat flap you'll require. This will enable you to select a flap that is big enough for your pet to go into the home and exit without needing to open the door every time.

If your kit has an illustration of where to drill, then stick it on the door and then draw a pencil around it. If your door has moulding or a sill at the bottom, be sure you leave plenty of space between your cat and these elements.

Use a set square to check that you are cutting correctly and to make sure the hole is a perfect rectangle shape. When you are satisfied with this, you can begin removing the remaining door material. If you own a square that you have cut, use it to check that you are cutting correctly and to ensure that the hole is in a rectangle. Once you are satisfied with this you can start to remove the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without worrying about them being in the house with visitors or leaving unwanted gifts in the house. It also prevents drafts and helps keep the temperature of your home stable. However, installing an animal flap on your door could be an intimidating task for those who have never done it before, which is why many people to call a professional carpenter or joiner to do the job instead. This is a viable option, however you can do it yourself if the tools are right and the directions are followed.

Although this is much simpler when using a timber door it is still possible to do this in uPVC doors, though you should be cautious not to damage the doors with cat flap as this will invalidate your warranty. The first step is to measure the door, ensuring that it can accommodate the new cat flap. This should be easy enough for the standard uPVC door, but you may require more care if you have an alternative type of door since these can be more difficult to cut than solid uPVC panels.

The next step is to measure the height of your cat's belly. This is the amount of height between the floor and the bottom of your cat's stomach. You will need to locate a space on the door that will allow your pet to move through easily. Once you've figured out the measurements you'll have to mark the area with a spirit level and a pencil, so that you know the hole will be suitable for your cat flap step.

After you have marked the area, it's time to cut the hole. You will need a jigsaw and it is crucial to take your time to ensure that the cuts are smooth and straight instead of uneven and rough, as this could damage your door. Wear safety glasses and a dust mask when using the Jigsaw. Inhaling sawdust can be harmful for your health. After you've completed the cutting, you'll need to smooth out the edges of the hole using sandpaper, so that your cat flap can be fitted easily.

Make a hole

The process of fitting a cat flap into an existing door panel or double glazing sealed unit is quite difficult. You may be tempted to tackle the job yourself, but unless have plenty of experience in DIY it is recommended to hire a professional to do the task for you. A shoddy job might not only look ugly, but also an enigma for security and also allow cold air to get in when the cat is outside and hot air to escape once inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure it is positioned correctly and is flush with the rest of the door. It is important to have some sandpaper on hand for any rough edges.

After the line is drawn, you can cut the hole using the jigsaw. Remember to wear the appropriate safety equipment for working with a power tool. If you are concerned about the sound produced by the jigsaw, consider buying a cordless version which is much quieter and easier to use.

It is essential to only cut away the material that is required for the fitment of the cat flap. A little bit of extra material will be required for the thickness of the wall of the flap but removing more than this can cause problems and even damage the doors frame.

If the upvc door is made of metal, or has a frame, it could interfere with the microchip flap. In this scenario you'll need make an oversize hole to ensure that the metal doesn't touch the wall of the flap.

If you want to install a cat flap into a upvc door panel with cat flap fitted or double-glazed window with metal frames, you'll need to consult a specialist. They will provide you with a new piece of glass that has the hole that is already designed for the cat flap. It will be much cheaper to do this instead of trying to install the cat flap onto an existing pane of glass that has not been manufactured specifically for this purpose.

Fit the Flap

Cat flaps let your pet come and go as they please, giving them the freedom to lounge in the home whenever they're feeling like it. If you have an uPVC front door, it may be difficult to put in a cat flap installation near me flap. This is particularly true when you don't have an glass panel which can be cut. Luckily, if you're happy to buy and install a new half-glazed uPVC panel, then it's possible to add an animal flap onto the doors. It's not as easy as just cutting a hole in the door, however there are a few things you'll need to take care of first to make sure it's safe.

A composite, uPVC, or GRP door panel is generally composed of a thin plastic skin which is bonded to an insulating polystyrene base. The material is quite fragile and care must be taken when cutting through it to avoid causing damage. This kind of door comes with a template that can be used to cut the hole.

After you have marked out the hole in your front door, it is time to put in the cat flap. You can purchase and install various models, from basic push-button operated models to ones that are activated by microchips that only let in your pet. However, no matter what type of cat flap you select, it's crucial to ensure that your cat is able to use the flap and not get stuck outside in the rain.

A circular Fitting Cat Flap In Upvc Door Panel is better than a square one, as circles can be cut more securely into glass. This is because square holes are more likely to break the glass when they are drilled. It's also a much safer option to use as you're not putting yourself at risk by drilling into toughened glass that could shatter and injure your pet or family members. This is especially important if there are elderly or children at home who could be hurt by glass fragments.