• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go inside and out at their own pace, without needing to let them in or out. They can also help prevent your cat from peeing in the home.

Fitting a cat flap in the door panel made of upvc is much simpler than installing one in a glass door, but it requires some knowledge and the proper tools.

Take a look at the Door

Fitting a cat door in the front door is difficult however, provided that the cat flap is the right type and you follow the instructions you can make it less difficult. We will demonstrate how to draw the shape and then use an jigsaw to cut the door area. Then we'll complete the job by attaching the cat flap. This will ensure the flap is in place and protects the doors from damage caused by rain and wind.

The first thing to do is measure the width of your pet in order to get a precise measurement of what size of cat flap you will require. This will let you select a flap that is large enough to allow your pet to go into the house and exit without having to open the door each time.

Once you have the measurements, you can mark out where on the door the template should be positioned, typically this is done using an X, however some kits include a drawing that shows the location to drill, if yours does, then you can stick it to the door and use a pencil to draw around the door. If your door has sill or moulding along the bottom of it then make sure you have clearance from these because this will ensure your cat flap installer near me's safety and prevent them gaining access to your home.

Then put on your eye protection as well as a dust mask, and using a jigsaw, begin cutting along the line you have pencilled in, but don't push the blade too hard, as this will cause it to cut faster than you'd like it to. If you own a square that you have cut, use it to ensure whether you're cutting in the right way and also to ensure that the hole is in a rectangle. Once you are happy with this you can begin to remove the remaining door material.

Draw a Line

The cat flap is a great method to let your pet in and out without worrying about them being a nuisance to guests or leaving unwanted gifts inside the house. It also prevents draughts, and keeps your home's temperature steady. However, installing the cat flap to your door could be an intimidating task for those who haven't done it before, leading many people to seek out a professional joiner or carpenter to do the job instead. While this is certainly an option, it is possible to do the work yourself if you own the right tools and follow the instructions with care.

While this is much simpler when using a timber door it is still feasible in uPVC doors, though you should be cautious not to damage the doors as this will invalidate your warranty. The first step is to measure the door, ensuring that it can be able to accommodate the new cat flap. This should be easy enough when you have a standard uPVC door, but you may require extra care if you are using an alternative type of door as these can be more difficult to cut into than solid uPVC panels.

Next, you will need to determine the belly height of your cat. This is the distance between the floor and the underside of your cat's stomach. It is important to locate a space on the door that will allow your pet to pass through wall cat flap comfortably. Once you have the information, you'll be required to mark the space using a spirit level and a pencil so that you are sure that the opening will fit your cat.

Once you have marked out the area, it's time to make the hole. You will need a jigsaw and it is essential to be patient to ensure that the cuts are smooth and straight rather than uneven and rough, since this could damage your door. Wear safety glasses and a dust mask while using a Jigsaw. Inhaling sawdust is dangerous for your health. After you've finished the cutting, you'll have to smooth out the edges of the hole with sandpaper so that your cat flap will fit easily.

Make a hole

The process of fitting a cat flap into an existing door panel or double glazing sealed unit is quite difficult. It is tempting to tackle the job yourself, but unless you have experience with DIY, it's recommended to hire a professional to do the job for you. A botched job could not only look ugly and unattractive, but could also be an security risk. It could let cold air in when the cat is outside and hot air to escape when it is inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure it is properly positioned and runs flush with the door's other parts. Make sure you have sandpaper in your possession to smooth any rough edges.

Wear any safety gear you'll need to use a power tool. If you're concerned about the noise, you can buy a jigsaw with a cord that is quieter and easier.

You should only remove the material needed to make the cat flap. A small amount of material is required to increase the thickness of the wall of the cat flap itself but cutting off more than this can cause problems or cause damage to the door frame.

If the door is made of upvc and has a metal panel or frame, it may interfere with the microchip flap. In this case, you will need to create an extra-large hole to ensure that the metal doesn't touch the walls of the flap.

If you're planning to install the cat flap onto the frame of a double-glazed window with a metal frame then you will need to speak to a specialist who can provide you with a new glass pane that already has the hole for the cat flap premade inside. It is much less expensive to have this done instead of trying to install the cat flap onto an existing pane of glass that hasn't been designed specifically for this purpose.

Install the Flap

Cat flaps allow your pet to come and go as they please, giving them the ability to unwind inside the house when they feel like it. However, if you have an upvc door panel with cat flap fitted door it can be difficult to install an animal flap, especially in the absence of glass panes that can be cut to fit one. If you are willing to install a half-glazed uPVC replacement panel, it is possible to add a cat flap in upvc door panel flap. It's not as easy as cutting a hole in the door, however there are some things you'll need to take care of first to make sure it's safe.

A uPVC, GRP or composite door panel usually has an extremely thin plastic outer skin joined to a soft polystyrene insulating core. The material is fairly fragile and care must be taken when cutting into it to avoid causing damage. This type of door typically has a template which you can use as a guide to cut the hole in your door.

After you have marked out the hole in your front door, it is time to install the cat flap. You can buy and fit a wide variety of different models that range from simple push-button operated models to microchip-activated ones that allow access only to your pet. However, no matter what kind of cat flap you pick, it's important to make sure that your cat can comfortably use the flap without becoming trapped in the weather.

It's a good idea choose circular fittings rather than a square one, as circles are more securely cut into the door glass. This is because square holes make the glass more susceptible to cracking when drilling is applied to it. It's also a safer option to use as you don't risk drilling into toughened glass that might break and hurt your pet or your family. This is particularly crucial if you have children or elderly people at home who might be injured by glass shards.